Description
SSH1102 - SAAS Silicone Intercooler Pipe Hot Side Bottom For Toyota Hilux 1GD 2GD 2.4L 2.8L 2015-Onwards
Our 5 Ply Silicone intercooler hoses are the ideal replacement/upgrade for factory or OE style rubber hoses
The SAAS SSH1102 is designed to replace the bottom factory hot side hose pipe with an upgraded flurosilicone coated silicone hose. Our multi-ply hose kits are supplied with stainless dual bead hose clamps and provide a secure solution and reduce the possibility of hose failure. Leaking, swollen or split intercooler hoses can lead to a loss of power.
FVMQ Oil Resistance: FVMQ Fluorosilicones offer the highest level of oil resistance amongst the most common elastomers and are a popular solution within the aviation industry
Fitting Notes:
SAAS Silicone Intercooler Hoses are designed to be more robust than the OE style of rubber hose. The multi-ply design may require warming to fit over pipe flanges and should be installed with the provided hose clamps to ensure a secure seal.
Features:
Suitable for the various Australian vehicle models listed below. Please note this is a guide only and you should confirm prior to fitment.
Our 5 Ply Silicone intercooler hoses are the ideal replacement/upgrade for factory or OE style rubber hoses
The SAAS SSH1102 is designed to replace the bottom factory hot side hose pipe with an upgraded flurosilicone coated silicone hose. Our multi-ply hose kits are supplied with stainless dual bead hose clamps and provide a secure solution and reduce the possibility of hose failure. Leaking, swollen or split intercooler hoses can lead to a loss of power.
FVMQ Oil Resistance: FVMQ Fluorosilicones offer the highest level of oil resistance amongst the most common elastomers and are a popular solution within the aviation industry
Fitting Notes:
SAAS Silicone Intercooler Hoses are designed to be more robust than the OE style of rubber hose. The multi-ply design may require warming to fit over pipe flanges and should be installed with the provided hose clamps to ensure a secure seal.
Features:
- Smooth Form 5 Ply polyester reinforced silicone moulded to factory shape
- ID 1: 64mm
- ID 2: 64mm
- Red FMVQ Fluorosilicone lining providing greater resistance to oil mist and EGR by-products
- Stable operating temp from -50°C to +200°C
- 4:1 burst pressures at safe working loads
- Black finish to retain that OE look
- Stainless Dual Bead Hose Clamps included
Suitable for the various Australian vehicle models listed below. Please note this is a guide only and you should confirm prior to fitment.
- Toyota Fortuner 2.8 GUN156 D 4x4 2015-2023
- Toyota Hilux 2.4 GUN122 GUN123 GUN135 D 2015-2023
- Toyota Hilux 2.4 GUN125 D 4WD 2015-2023
- Toyota Hilux 2.8 GUN123 D 2015-2017
- Toyota Hilux 2.8 GUN126 D 4WD 2015-2023
- Toyota Hilux 2.8 GUN136 D 2015-2023