Description
SSH1111-KIT - SAAS 2 Piece Silicone Intercooler Hose Kit For Toyota Hilux 3.0L 1KD-FTV 2005-15
Our 5 Ply Silicone intercooler hoses are the ideal replacement/upgrade for factory or OE style rubber hoses
The SAAS SSH1111-KIT is a 2 piece hose solution designed to replace the factory hot and cold side hose pipes with an upgraded flurosilicone coated silicone hose. Our multi-ply hose kits are supplied with dual bead stainless clamps to provide a secure connection and reduce the possibility of hose failure. Leaking, swollen or split intercooler hoses can lead to a loss of power.
FVMQ Oil Resistance: FVMQ Fluorosilicones offer the highest level of oil resistance amongst the most common elastomers and are a popular solution within the aviation industry
Fitting Notes:
SAAS Silicone Intercooler Hoses are designed to be more robust than the OE style of rubber hose. The multi-ply design may require warming to fit over pipe flanges and should be installed with the provided hose clamps to ensure a secure seal.
Features:
Suitable for the various Australian vehicle models listed below. Please note this is a guide only and you should confirm prior to fitment.
Our 5 Ply Silicone intercooler hoses are the ideal replacement/upgrade for factory or OE style rubber hoses
The SAAS SSH1111-KIT is a 2 piece hose solution designed to replace the factory hot and cold side hose pipes with an upgraded flurosilicone coated silicone hose. Our multi-ply hose kits are supplied with dual bead stainless clamps to provide a secure connection and reduce the possibility of hose failure. Leaking, swollen or split intercooler hoses can lead to a loss of power.
FVMQ Oil Resistance: FVMQ Fluorosilicones offer the highest level of oil resistance amongst the most common elastomers and are a popular solution within the aviation industry
Fitting Notes:
SAAS Silicone Intercooler Hoses are designed to be more robust than the OE style of rubber hose. The multi-ply design may require warming to fit over pipe flanges and should be installed with the provided hose clamps to ensure a secure seal.
Features:
- Smooth Form 5 Ply polyester reinforced silicone moulded to factory shape
- ID 1: 54mm / 50mm
- ID 2: 54mm / 50mm
- Red FMVQ Fluorosilicone lining providing greater resistance to oil mist and EGR by-products
- Stable operating temp from -50°C to +200°C
- 4:1 burst pressures at safe working loads
- Black finish to retain that OE look
- Stainless Dual Bead Hose Clamps included
Suitable for the various Australian vehicle models listed below. Please note this is a guide only and you should confirm prior to fitment.
- Toyota Hilux 3.0 KUN16 D 2005-2015
- Toyota Hilux 3.0 KUN26 D 4WD 2005-2006
- Toyota Hilux 3.0 KUN26 D-4D 4WD 2006-2015
- Toyota LandCruiser Prado 3.0 KDJ120 KDJ125 SUV D-4D 2006-2010